How do you wind an electric car window up? - electric car polisher
The electric window on one side of the car died. Now he is caught in the down position, but the other window side works fine though.
I checked both fuse locations in the car and hood but none of them have fuses for the windows.
I even manually checked the car and there's nothing about window fuses or how we get the damned in situations like this.
I even used a pair of pliers to see if I could trust. I'm running out of ideas - please help!
Sunday, January 10, 2010
Electric Car Polisher How Do You Wind An Electric Car Window Up?
3 comments:
If you can hear the election. Engine running when you have made the window, try a broken window regulator. If you do not hear the fuel its best chance of a bad engine. Tip: Press the door panel, if someone switches on the window to the top job, sometimes wakes up from a dead window motor.
The only requirement is a small amount of mechanical skills.
Something is missing in our "educated youth seems to Game Boy."
Because electricity is the source for the operation of the window, not the "Wind It Up".
Remove the support and the inner door panel. Inside the door there is a long arm to the bottom of the cup see attached. Bras press until you close the window. When the engine is solid, you have the two screws, remove the window on the arm.
If you need more information about the diagnosis and repair this problem, ask him.
Once you manually pull the inner door panel was removed. Meanwhile, a large piece of plastic to cover at the top of the door before closing it to keep busy. One trick is that the work can hold down the button, while the true center of the inner door panel with his fist to shake lose the motor rotor position Paste.
Sprinkle the rails of the window is managed by a large amount of silicone spray lubricant to help move easily into the tours.
Post a Comment